Application: various adaptors used for 99% of cars
Function:remove dust, rain and snow
1.Rubber strip protection sleeve
Wipers use protective sleeves to prevent scratches and wear of rubber strips. Remove protective sleeves before using them.
Including metal and plastic two materials, stable and solid.
3.TPR wiper cover
Fix the internal rubber strip to prevent the rubber strip from moving.The cover is designed by hook,which can not be dismantled and will not fall off.
High quality, moderate soft and hard, no hair pulling and cracking, and more closely attached to the windshield, no noise.
5.Top grade spoiler
Surface matt treatment,the structure adopts integrated design to prevent water marks from being left in the process of flow guiding, simple and fashionable.Reduce wind resistance and reduce motor load.
6.Memory flexible strip
High quality , one - time stamping forming, good resilience.Closely with the windshield.
1.Remove the rubber strip protection sleeve before installation.
2.Take the old wiper up and adjust it to the angle perpendicular to the U-bar, remove the wiper,and pull the U-bar out.
3.Put a towel on the interface(to prevent knocking the glass).
3.Install the new boneless wiper and gently press the button on both sides of the connector to open the middle lid.
4.Insert the U-bar in and fasten it. Press the lid.
1.Check the wiper regularly, when you find it seriously wear or dirty, you need to change or clean it in time.
2.Usewindshield washer fluid when scraping the dust or mosquitoes.Choose windshield washer fluid with good quality and no alcohol,otherwise, it is very corrosive to the rubber.
3.If there is oil, wax, dirt and other foreign matter on the windshield, it should be cleaned before use. otherwise, wiper can not work normally, will shorten the life.
4.When used in winter, the ice slag on the surface of the windshield should be cleaned with an ice shovel to avoid burdening the wiper.
Packaging & Shipping
2:Size of the carton:L45xW45xH20/25cm;50 meters per carton